55
User Manual M70 / M80 / M90
Getting to know
2. In the
Call Forward
menu (Fig. 1), select the call forwarding event
3. Press the function key underneath
Off
(e.g., Fig. 2 and 4).
4. Press the red cancel key
once to return to the call forward menu, twice to return to the
Settings
menu.
Bluetooth
The handset can be used with a Bluetooth headset which must be paired with the handset first. When
the headset has been paired, it is added to the list of
Paired Devices
. The connection to the headsets
on this list can be disconnected and reestablished with one key press without having to go through
the pairing process again.
In the default setting, Bluetooth is disabled. To be able to use Bluetooth, the function must be enabled.
To save battery power and avoid unnecessary radiation, however minimal, you may want to disable
Bluetooth when you are not using it. When Bluetooth is enabled, the Bluetooth logo is shown to the
right of the signal strength indicator in the top line of the display.
Fig. 1
Fig. 2
Fig. 3
Enabling and disabling Bluetooth
1. Open the
Settings
menu and press
to go directly to
Bluetooth
at the bottom of the menu.
2. Press
Select
or the center of the navigation key
to select
Enable/Disable
(Fig. 1 and 2). You will
be asked whether to enable or disable Bluetooth, depending on its current status (Fig. 3).
3. Press
Yes
or
No
to save changing or keeping the current status and to return to the
Bluetooth
menu.
Pairing
1. Make sure that Bluetooth is enabled.
2. Scroll to
Search for devices
and press
Select
or the center of the navigation key
.
3. Put the headset into pairing mode as described in your headset's user guide.
4. If the phone has detected more than one headset, select yours from the list and press
Pair
. When
pairing has been successful, you will see the message "Bluetooth connection established".
