Snom M100 KLE, Руководство администратора и поставки, Страница: 14 / 190

Introducing the M100 KLE 14
Back to Contents
M100 KLE Administrator and Provisioning Manual
M100 KLE Configuration Methods
You can configure the M100 KLE using one of the following methods:

From the M10 KLE handset using the handset menus. The M10 KLE menus are
best suited to configuring a few settings, perhaps after the initial setup has been
done. For administrators, the settings available on the M10 KLE menus include
network settings, account settings, and provisioning settings. See
“Using the
Admin Settings Menu” on page 24
. Many of the settings accessible on the M10
KLE are most useful for end users. Through the menu, they can customize the
screen appearance, sounds, and manage calls. For more information, see the
M100 KLE/M10 KLE User Guide.

The Web User Interface, or WebUI, which you access using your Internet browser.
See
“Using the WebUI” on page 35
. The browser-based interface is easy to
navigate and best suited to configuring a large number of M100 KLE settings at
once. The WebUI gives you access to every setting required for configuring a
single device. You can enter service provider account settings on the WebUI,
assign accounts to handsets, and set up provisioning, which will allow you to
automatically and remotely update the M100 KLE after initial configuration.

Provisioning using configuration files. Working with configuration files allows you to
configure the device at regular intervals. There are several methods available to
enable the M100 KLE to locate and upload the configuration file. For example, you
can enable the M100 KLE, when it starts up or reboots, to check for the presence
of a configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the M100 KLE automatically downloads the file and
applies the new settings. For more information, see
“Provisioning Using
Configuration Files” on page 109
.