1.
2.
Setting up a Snom DECT Base of the M-SC-Series on a
FritzBox
Connecting FritzBox to DSL via DSL adapter
2) Setting up Internet access
3) Setting up Snom IP-Phone
3.1) Step by step instructions - FritzBox:
3.2 Step by step guide - Snom DECT base:
Pairing handsets
Rename Handset
Create accounts
Assign account to handset
4) Set up Snom DECT handset of the M-SC series directly on the Fritzbox
Telephony Features
Change language
Forward calls:
Attended transfer
Blind transfer
Related articles
Introduction
To anticipate this, a FritzBox can easily act as a
and thus integrate VoIP telephones in the same way as ISDN or analog telephones, in the
SIP registrar
).
This article is based on a test on a
with
. It was tested on a Telekom All-IP connection.
FritzBox 7590
Fritz OS version 7.20
1) Connecting FritzBox to DSL
The cables and adapters supplied with the FritzBox differ depending on the product variant.
Therefore, take the cabling according to the scope of delivery of your FritzBox as in one of the two following sections described above.
Connect FritzBox to DSL via DSL cable (TAE/RJ45)
Plug the RJ45 plug of the DSL cable into the "
" socket of the FritzBox.
DSL/TEL
Plug the TAE plug of the DSL cable into the socket of the TAE socket labeled " " (see Fig. 1).
F
Fritzbox 7590
Fritzbox 7390
You can enlarge all pictures by clicking on them!
