70
D335 User Manual
Configuring the Function Keys
other module of the same type is connected to the phone. They are not visible on the function
keys page when no expansion module is connected.
◦
Context
This setting specifies which configured identity will be used when executing the functionality
of the key. You may want to use this feature when you have accounts with different providers
or when you wish to present different identities to certain destinations.
For example: If you have programmed key P2 to speed dial a specific number and you want to
use configured identity 2 to call that number, select configured identity 2 from the drop-down
menu of P2's "Context". When you speed dial the number by pressing key P2, identity 2 will be
used as the outgoing identity.
The default setting is "Active", which means that the identity selected as the phone's outgoing
identity at any given time will be used.
◦
Type
Select the type of functionality from the drop-down list. See "Appendix 4 - Programmable
Functions" on page 117 for more information. If you select "Key Event", a drop-down list with
the available key events will replace the text field under "Number". The default setting is "line".
◦
Number
Enter one phone number or value for the function or, if the function is key event, select an
event from the drop-down list. Enter phone numbers exactly the way they need to be dialed,
i.e, type the number without spaces or punctuation marks between the digits. For example, a
number with an area code that might conventionally be notated as (916) 555-1234 should be
entered as 9165551234.
◦
Short/Full Label Mode (phone)
Select a mode from the drop-down list. The default settings for both are icon and text.
-
Icon. The label will display the icon of the functionality mapped onto the key, e.g.,
, if extension;
, if speed dial; etc.
-
Text. The label will display the text you have entered in step 10 of "Function key settings
on the phone" on page 73 or the number if no text was entered.
-
Icon and text. The label will display the icon of the functionality mapped onto the key and
the text or number.
◦
Short/Full Label (phone), Label (D3 expansion module)
Optional: Enter a name or other descriptive text in the text field. This is the data displayed on
the key's label area on the phone and on the D3's display, respectively. If you leave the field
blank, the number will be displayed in the key label area.
◦
LP Feature
(setting on phone only – functionality for long-pressing of keys)
This is a shortcut to the configuration menu of each function key with LED
(keys
P1–P32). In the default setting, the function is enabled (Fig. 1).
If necessary, use the page key
to select the page the key is on and press the key for three
seconds to open its configuration menu. The yellow LED on the key blinks. See
settings on the phone" on page 73, step 4, on how to continue.
Note: The LP Feature must be deactivated for the functions Push2Talk and Line
Info Layer.
If the LP feature of a key has been disabled, use the
Preferences
menu,
Fkeys
and
SmartKeys
submenus to access the key's configuration menu.
Содержание 00004390
Страница 1: ...IP Phone D335 User Manual ...
Страница 113: ...113 D335 User Manual Appendix 1 ...