58
D315 | D305 User Manual
Using the Phone
Rejecting anonymous calls
With this setting you can have your phone reject calls from phones that are blocking or not
transmitting their numbers.
Please
note:
Calls from analog phone connections without caller ID will, most likely,
be received as anonymous calls. They will be rejected when you turn this function on.
Activating rejection of anonymous calls:
1. Press
or the function key underneath
, if the symbol is available.
2. Press
2 Call Features
.
3. Press
3 Incoming Calls
. The empty box of the setting "Reject anonymous" (Fig. 1) indicates
that the function is inactive.
4. Press
1
to activate the function. When it is activated, i.e., anonymous callers are being rejected,
the box is checked
(Fig. 2).
Fig. 1
Fig. 2
5. Press for two seconds to return to the idle screen.
Deactivating rejection of anonymous calls:
1. Press
or the function key underneath
, if the symbol is available.
2. Press
2 Call Features
.
3. Press
3 Incoming Calls
. The box with the checkmark
of the setting "Reject anonymous" (Fig. 2)
indicates that the function is active.
4. Press
1
to deactivate the function. The checkmark is removed from the box
, indicating that the
function is now inactive (Fig. 1).
5. Press for two seconds to return to the idle screen.
C
all forwarding
The phone can be set to forward incoming calls, either always or under certain conditions. The
settings can be done on the phone and on the web interface. For further information on using the web
interface for these settings, see "Call forwarding" on page 74.
Note:
The call forwarding settings made on the phone apply to all configured identities.
On the web interface, the call forwarding settings are made separately for each identity.
