ENGLISH - 21
Place controller and plug the cables to the
controller (Power, signal and controller cables)
G-5
Get Power input cable and plug into cigar
lighter socket (12V outlet)
To source power from car battery, cut off
cigar-jack connector to take inner three cables
out and peel off each to take copper cable out
G-2
If desire to place the controller on the wall, fix
the controller with provided bracket with
four(4) screws
Once all cables are connected, connection part
can be hidden using rear cable cover
G-6
Get Controller bracket, rear cable cover and
four(4) M4x20 bolt
G-4
G-1
G. Controller installation
G-3
Match the power cables polarities to the
battery polarities, red to red / back to black and
white ignition cable to ignition port of the
vehicle
12V DC
Ignition
