manualshive.com logo in svg

Snell VEGA-16MV, Руководство пользователя, Страница: 45 / 260

Поделиться
Скачать
Snell VEGA-16MV Скачать руководство пользователя страница 45

Vega-MV Router Multiviewer - User Manual  

Issue 1 Revision 2

Page 45

© 2017 SAM

   

MV-VIP4 Card and Rear Module - Slots 2 to 5 

Vega-MV Unit Hardware  4.7 

4.7 MV-VIP4 Card and Rear Module - Slots 2 to 5 

A Vega-MV contains two or four Video Input Processing Cards (MV-VIP4 cards) in front slots 
2 to 5 and corresponding MV-VIP4 rear panel modules fitted at the rear.

Vega-16MV

 contains:

 

•

Two MV-VIP4 cards.

•

Two MV-RMVRO8 rear panel modules.

Vega-32MV

 contains:

 

•

Four MV-VIP4 cards. 

•

Four MV-RMVRO8 rear panel modules.

The MV-VIP4 video processing card utilises the latest generation of scaling technology in 
order to be able to process inputs with up to 4K60 resolution. With the MV-VIP4 rear panel 
module fitted, the combinations of router video input and output types supported are:

•

8x SD/HD/3G-SDI digital video. 

•

4x 4K30 6G-SDI digital video (4x dual-link 6G). 

•

2x 4K60 via quad link 3G-SDI digital video (2x Quad-link 12G).

•

2x 4K60 12G-SDI digital video.

Figure 27  Vega-MV Slots 2 to 5

Note:

•

Vega-MV cards and rear panel modules detailed here as spares items only. 

Slot 2

Slot 3

Slot 4

Slot 5

Slot 2

Slot 3

Slot 4

Slot 5

Содержание VEGA-16MV





































































































































































































































































Отзывы:

Нет отзывов