Vega 30 Router User Manual
Processing Control
Vega 30 Web Interface 6.8
Issue1 Revision 1
Page 92
© 2017 SAM
Item
Description
Apply
Button.
Click to apply settings changes made on the page.
(See Table 14 for more details about the
Apply
button operation.)
The user may leave the current page, but any changes will not be applied (and will be lost.)
VFade Outputs 1-12
Drop-down box.
Select V-fade rate on outputs 1 to 12.
Select the V-fade rate to reduce any audible disturbance during
switching.
The setting is subjective and dependent on the audio media being
switched.
•
Fast. (Default)
•
Medium.
•
Slow.
For V-fade durations, see A.9 “Audio V-Fade Rates” on page 244.
See
Note 1
.
VFade Outputs 13-24
Drop-down box.
Select V-fade rate on outputs 13 to 24.
See
Note 1
.
VFade Outputs 25-34
Drop-down box.
Select V-fade rate on outputs 25 to 34.
See
Note 1
.
Note 1:
The V-Fade function is enabled on an output-by-output basis.
Use the:
•
‘Quiet Switch V-Fade enable’ controls in the Web interface
‘Processing Control’ page.
•
‘V-Fade enable’ in the RollCall interface ‘Port
Configuration’ template.
Table 24
Processing Control Web Page - Items on top section of screen