Vega 30 Router User Manual
Router Configuration and Control
Product Overview 3.6
Issue1 Revision 1
Page 27
© 2017 SAM
3.6 Router Configuration and Control
3.6.1 Overview
Vega 30 unit configuration may be done in either of the following ways:
•
Web browser. (See Section 6 "Vega 30 Web Interface" on page 45.)
•
RollCall. (See Section 8 "Configuration with RolllCall" on page 117.)
A user can thus configure a unit and backup/restore configuration and persistent data (route
settings and adjustable CQS parameters).
The following router control methods are available:
•
Vega 30 Web browser control panel for routing and processing.
•
RollCall interface.
•
SAM Luna hardware control panels.
•
Protocols:
•
General Switcher (SW-P-02) protocol on ethernet.
•
General Remote (SW-P-08) protocol on ethernet.
•
SNMP.
Figure 10 Example Vega 30 Router System Layout
Local Area Network
PC
Mac
PC
SAM Hardware
Control Panel
SAM Hardware
Control Panel
RollCall Control Panel
installed on
a Windows PC
Vega 30
Web Interface
browsed on an Apple Mac
Vega 30
Web Interface
browsed on a Windows PC
Vega 30 Router