Vega 30 Router User Manual
Video-only Router Use Case
Routing Use Cases 10.2
Issue1 Revision 1
Page 173
© 2017 SAM
10.2 Video-only Router Use Case
Video routing with embedded audio:
In this use case, the Vega 30 Router is used for SDI video routing only, i.e. video with
embedded audio. There is no separate audio routing and no audio processing required.
Example:
Switching a SDI video signal from router port 2 to router output port 3
.
Direct Video routing:
•
Use RollCall Direct Video routing XY panel to make the routing:
‘destination 3 from source 2’.
Association Routing (Pre-defined video sources and destinations):
•
Use RollCall Assoc routing XY panel to make the routing:
‘destination 3 from source 2’.
or
•
Use the Set Routes Web page to make the routing:
‘destination 3 from source 2’.
Figure 125 Vega 30 Use Case - Video-only
Licenses required:
None. (The Vega 30 is a basic 34 x 34 video-only router by default.)
Routing:
•
Association Routing (pre-defined video sources and
destinations) over the video crosspoint.
or
•
Direct Video routing control over the video crosspoint.
Video Crosspoint
Actively-switched output