manualshive.com logo in svg

Snell Advanced Media MV-805, Руководство пользователя

Поделиться
Скачать
Snell Advanced Media MV-805 Скачать руководство пользователя страница 53

MV-805 IP Multiviewer User Manual

 System-Setup Template 

RollCall Templates 6.2

Issue1 Revision 1

Page 53

© 2018 SAM

Setting

Description

Interface

Drop-down menu.

Select the physical network interface to configure:

•

Control : eno1.

•

Control 2 : eno2.     (See 

Note 1

.)

•

ens2f0 : ens2f0.    (Media IP fabric connection)

•

ens2f1 : ens2f1.    (Media IP fabric connection)

•

ens1f0 : ens1f0.    (Media IP fabric connection, MV-805-32-only)

•

ens1f1 : ens1f1.    (Media IP fabric connection, MV-805-32-only)

Note: 

Each physical network interface may be renamed in the template. 

The name that appears in the template’s drop-down menu is formed from the name 
and the identifier: “name : identifier”. 

      For example, “Control : eno1”.

IP Address

Text box.

Static IP address of the selected interface. (IPv4)

Click the 

S

 button to locally save the new setting.

Subnet Mask

Text box.

Subnet mask of the selected interface. (IPv4)

Click the 

S

 button to locally save the new setting.

DHCP

Check box.

Tick to enable dynamic host configuration protocol (DHCP) on the selected interface.

Click the 

S

 button to locally save the new setting.

Interface Name

Text box. 

Enter a “friendly” name for the interface.

Click the 

S

 button to locally save the new setting.

Default Gateway 
Address

Text box.

Static IP address of the gateway for the selected interface to use. (IPv4)

Click the 

S

 button to locally save the new setting.

Primary DNS IP 
Address

Text box.

Static IP address of the primary Domain Name System (DNS) server for the selected 
interface to use. (IPv4)

Click the 

S

 button to locally save the new setting.

Secondary DNS IP 
Address

Text box.

Static IP address of the secondary DNS server for the selected interface to use. (IPv4)

Click the 

S

 button to locally save the new setting.

Note 1:

Network interface “Control 2 : eno2” (i.e. the second control network interface) may not 
appear in the drop-down menu unless there is a network connection to the rear of the unit.

Table 11 Network Interface Settings

Note:

Media IP Fabric Interfaces and network connection:

•

‘ens2f0’ and ‘ens2f1’ must be connected to a different IP fabrics.

•

‘ens1f0’ and ‘ens1f1’ must be connected to a different IP fabrics. (MV-805-32)

Содержание MV-805












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды