MC1000/MC1000-IQ/MC2000/MC2000-IQ
Conversion Operational Examples
Issue 1 Rev 8
Page 157
© 2015 SAM
A.3 MC1000 Frame Rate Conversion – SD Composite Video
Example
You have received SD composite PAL content at 625 50i and need to convert it to SDI
1080 59i. Audio is not required.
Steps
1.
On the rear panel, connect the SD composite source (625 50i) to CVBS A1.
2.
On the front panel, press the INPUT Shortcut button.
3.
Choose Input Select > CVBS A, then select Done.
4.
Press the HOME button.
5.
Verify that the status display shows “625 50i” as the input. If the status display shows
“input loss”, review steps 1 to 3 to ensure you have correctly connected and routed
the source.
6.
Press the OUTPUT Shortcut button.
7.
Select Output Standard > 1080 59i, then select Done.
Note:
Not applicable to MC1000-IQ, the MC1000-IQ unit has no CVBS inputs.
Important:
Ensure that you have the CT1 option fitted.
Note:
In steps 1 to 3 you have routed the input from CVBS A1 to the processing channel.
Note:
In steps 6 and 7 you have set up conversion of SD PAL 625 50i to HD SDI 1080 59i on the
processing channel.