LC2000/LC2000-IQ/LC4000/LC4000-IQ
RollCall Control Panel System Setup Screens
Issue 1 Rev 6
Page 109
© 2015 SAM
10.8 Memories
The Memories
screen enables you to save up to eight system-level memory setups and recall
them when required.
You can change the default memory names to more relevant ones if required.
Memories set at a system level store all system settings
except for
the following:
•
Network > DHCP
•
Network > IP Configuration
•
Network > IP Gateway
•
Network > IP Netmask
•
RollCall > Unit Name
Settings stored in the system memories include:
•
CVBS encoder or decoder settings (if fitted) - LC2000/LC4000 only
•
Dolby option settings (if fitted)
•
Genlock selection and adjustment
•
AES and analog audio routing
•
CVBS calibration - LC2000/LC4000 only
System memories do not store any processing channel data.
10.8.1 Creating and Saving Memories
1.
In the Memory Select column, choose a memory.
2.
In the Change Name field, type a new name for the memory.
3.
To save the memory name, click S. To return the memory to its default value, click P.
4.
To save the memory, click Save Memory.
The new memory name appears in the Memory Select column.
