Snarkoon LIGHT2 100, Руководство пользователя

Страница: 10 / 15

10
9. DPI Settings
The seven DPI steps of the Light² 100 can be modified as desired. Each step can be assigned with a DPI value
between 200 and 5,000. The currently selected DPI step is highlighted in blue. DPI steps which are not needed can
be deactivated.
The DPI steps are named, from top to bottom, DPI 1 to DPI 7. To deactivate a step, click in the box which is on the
left next to the DPI step name. The check will disappear. The empty box indicates that the DPI step is deactivated.
The step will no longer be selected when switching through the DPI steps with the corresponding mouse button.
To reactivate the step, click again in the box to replace the check.
To adjust the level of the DPI step, move the top or bottom blue slide control - to the left or to the right - along
the slide bar.