background image

4

ASSEMBLING YOUR SUPER TITAN XL 

1. Unpack and lay out all parts.
2. Thread DOOR HANDLE SPOKES (Part #11) onto the hub on DOOR (Part #12).
3. Install a fresh high-quality 9V battery in the Entry Keypad. 

(See pages 8 and 

9).

4. Important – Remove temporary door hinge bolts from door hinges.
5. Enter the factory combination OR FRAME (Part #6) and set aside.
6. Assemble Top, Bottom and Sides (Parts #1 through #4) first. Then bolt the 

entire assembly onto the BACK (Part #5).

7. For additional help watch our “Live Action Assembly Video” on the “Features” 

page at www.snapsafe.com.

Notes:
1. Each part is marked with an assembly number, orientation and instructions.
2. Each part’s orientation e.g. TOP, BOTTOM, FRONT, etc. matches its orientation 

in the assembled vault. LEFT and RIGHT are as you face the front of the vault.

3. For easier assembly of the nuts, remove the FIRESHIELD blankets from the 

TOP, BOTTOM and SIDEWALLS. Stuff them back into place before interior 
assembly.

4. Screw on nuts loosely at first. Once all Exterior Panels are aligned and seated 

tighten the nuts. 

5. The INTERIOR SIDE PANELS are designed to fit snuggly. Insert them through 

the door opening bottom-to-top and then slide into final position front-to-back.

6. Insert the INTERIOR BOTTOM PANEL through the door opening between the 

front and back shelf strips and then drop into position front-to-back.

BOLTING DOWN YOUR VAULT 

We recommend bolting your vault to the floor using two ¼" wedge anchor 
concrete bolts through the predrilled holes in the BOTTOM of the vault.

DOUBLE SAFEGUARDING VALUABLE PAPERS 

Your SnapSafe Super Titan XL’s Fire Shield protection is rated at 2300ºF for one 
hour. However, we recommend that if you are going to be putting important 
papers in the vault, you first put it in a fire resistant document box, and then 
put it in the vault. 

YOUR COMBINATION CODE 

•  Your factory preset combination code is 1-2-3-4-5-6.
•  It is recorded in a small envelope wired to the door handle of your vault. 

Store this combination in a location other than your vault.

Содержание Super Titan XL









Отзывы: