38.74”
19.25”
20.67”
INSTALLATION MANUAL
SR-RACKSLIDE-300
Strong™ Metal Rack Sliding Base
Lifetime Limited Warranty
All Strong™ products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty
shall notapply to products which have been abused, modified or disassembled. Products to be repaired under
this warranty must be returned to SnapAV or a designated service center with prior notification and an
assigned return authorization number (RA).
For Techincal Support : 1.866.838.5052
Lifetime
CABLE MANAGEMENT
1. Determine direction of rack rotation and wiring plan for this direction. Select one side of rack for signal cables,
and the opposite side for power cables. Fully extend rack and rotate 90 degrees in intended direction. Lace
cables ensuring they are fairly taut. This will help ensure that the service loop will be the correct length and not
be pinched when closing the rack.
NOTE: Wiring this way will keep the rack rotation in the direction
originally selected when cabling is complete.
Cable Management Tip:
Tie your cable bundles at least every 6” - 8”. This allows cable bundles
to lay neatly together when rack is in the closed position.
DIMENSIONS
60
°
90
°
120529-1000
PG.3
