Snap-On VERUS, Руководство пользователя

Страница: 87 / 188

77
Guided Component Test Operations Vehicle Identification
Power User Tests
The Power User Tests option gives you quick access to a pre-configured meter for conducting a
number of control system tests. Tests are available with or without on-screen help. Help typically
provides a description of the test along with expected results and a link to the pre-set meter.
How To
The How To option provides a list of available on-screen instructions for performing tasks. Scroll
to view the entire list. Typical topics include:
•
10-Minute Battery Drain Class —covers battery draw basics.
•
10-Minute Electronic Class —provides brief instruction in basic electronics and circuit
connections.
•
10-Minute High Intensity Discharge Lighting Class —provides brief instruction on high-
intensity lighting system basics.
•
10-Minute Lin Bus Class —provides brief instruction on LIN BUS systems.
•
15-Hybrid Vehicle CLASS —provides a brief overview of hybrid vehicle systems.
•
15-Minute Ignition Class —provides an introduction to basic ignition testing.
•
15-Minute Mapped Cooling System Class —provides a basic system overview.
•
15-Minute Tyre Pressure Monitoring System Class —provides a basic system overview.
•
15-Minute Voltage Drop Diagnosis Class —covers performing voltage drop tests and using
the results to diagnose circuit failures.
•
15-Minute Lin Bus Class —provides brief instruction on LIN BUS systems.
•
Illustrated Terms & Definitions —provides definitions of terms, drawings and tips associated
with g
uided
component testing.
•
No-start Basics —provides a guideline for diagnosing a no-start condition.
•
O2 Sensor & Feedback System Analysis —displays the g
uided
component test meter in the
“live” graphing mode with O2S test tips to help you understand the fundamental concepts of
O2S diagnostics.
•
Test Tips —gives on-screen instructions for performing specific g
uided
component tests along
with drawings and tips.
•
20-minute Current Ramp Classes —provides an introduction to current ramp testing.
7.1.2 Creating a Favorites List
Once a Guided Component Test database is loaded, a list of manufacturers displays. This list is
often long and includes makes that are not frequently used. A toolbar at the top of the screen
allows you to custom configure the manufacturer list to display only the makes you frequently
service.