manualshive.com logo in svg

Snap-On Versus Edge, Руководство пользователя


Поделиться
Скачать
background image

74

Chapter 7

Guided Component Test 
Operations

The Guided Component Test software is a component-testing powerhouse, providing you with a 
robust diagnostic database for use with scopes and meters. It is like having access to a complete 
library of shop manuals for testing engine-management components, transmission sensors and 
components, and ABS systems.

Guided Component Test helps you with everything from selecting the appropriate test for a 
specific component to showing the hook-up location and correct pin configuration. This software 
thoroughly guides and instructs you on proper testing procedures and offers tips from the internal 
troubleshooter database. The Guided Component Test procedures, tips, and meter settings 
reduce your overall set-up and diagnostic testing time. Vehicle-specific Guided Component Tests 
are provided for engine, transmission, ABS, charging, transfer case and suspension systems.

:$51 ,1*

Risk of electrical shock.

•

Read  the  Important Safety Instructions document provided separately for messages on 
the safe use of this product.

•

This product is intended for Measurement Category I (for example, automotive 12V 
systems), do not use this product for Measurement Categories II, III, and IV.

•

Measurement Category I is for performing measurements on circuits not directly 
connected to MAINS or MAINS circuits (an example of a MAINS circuit is 120V AC or 
240V AC household or industrial electricity), do not connect this product to MAINS or 
MAINS circuits.

•

Do not apply the Black Ground Lead to test points other than ground/system return/
vehicle chassis.

Electrical shock can cause personal injury, equipment damage, or circuit damage.

IMPORTANT:
Maximum rated transient over voltage impulse is 500 volts, do not exceed the rated 
transient over voltage.

7.1   Vehicle Identification

The Guided Component Test information presented is specific to the vehicle being tested. 
Therefore, certain attributes of the test vehicle must be entered into the diagnostic tool so that the 
correct data can be retrieved. Vehicle identification information is carried over if you enter the 
Guided Component Test module either from the Scan Module or from one of the records stored in 
the Vehicle History module. However, you may need to enter additional attributes in some 
instances.

The vehicle identification sequence is menu driven, you simply follow the screen prompts and 
make a series of choices. Each selection you make advances you to the next screen.

Содержание Versus Edge










































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Versus Edge

Bartec Agile X IS Installation Manual preview
Agile X IS
Бренд: Bartec Страницы: 7
Wacom DTK-2241 User Manual preview
DTK-2241
Бренд: Wacom Страницы: 85
KD interactive Kurio 7 Quick Start Manual preview
Kurio 7
Бренд: KD interactive Страницы: 8
E-Medic 2012673e Manual preview
2012673e
Бренд: E-Medic Страницы: 28
Pro-Ject Audio Systems RPM 9.1 Acryl Instructions For Use Manual preview
RPM 9.1 Acryl
Бренд: Pro-Ject Audio Systems Страницы: 8
Naxa NID-7056 Instruction Manual preview
NID-7056
Бренд: Naxa Страницы: 23
Wacom PENPARTNER 2 - User Manual preview
PENPARTNER 2 -
Бренд: Wacom Страницы: 55
Thunderbook Atlas W115 Quick User Manual preview
Atlas W115
Бренд: Thunderbook Страницы: 16
Allview Wi901N Quick Start Manual preview
Wi901N
Бренд: Allview Страницы: 35
Leica CS35 Start-Up And Entitlement Activation Manual preview
CS35
Бренд: Leica Страницы: 18
Leica CS25 GNSS plus User Manual preview
CS25 GNSS plus
Бренд: Leica Страницы: 40
Panasonic FZ-F1BF Operating Instructions Manual preview
FZ-F1BF
Бренд: Panasonic Страницы: 28
Pioneer Super Tuner III D DEH-P4800MP Installation Manual preview
Super Tuner III D DEH-P4800MP
Бренд: Pioneer Страницы: 7
Pioneer PL-61 Owner'S Manual preview
PL-61
Бренд: Pioneer Страницы: 13
Pioneer PL-510 Service Manual preview
PL-510
Бренд: Pioneer Страницы: 7
Pioneer PL-51A Service Manual preview
PL-51A
Бренд: Pioneer Страницы: 16
Pioneer PL-51 Service Manual preview
PL-51
Бренд: Pioneer Страницы: 16
Rotel RP-830 Owner'S Manual preview
RP-830
Бренд: Rotel Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды