28
Scanner Operations
Navigation
The large end of the auxiliary power cable plugs into the vehicle accessory port. The small end of
the cable fits into a power port built into the side of the cable adapter. An in-line fuse on the
auxiliary cable provides circuit protection.
z
To connect the data cable to the vehicle:
1.
Follow the on-screen instructions for connecting to the vehicle (
).
2.
Once connected, select
Continue
.
The Scanner establishes communication then displays a list of available tests. If the Scanner
is unable to establish a communications link, a “no communications” message displays.
3.
Select from the available tests to open a submenu of test options.
5.3.2 No Communication Message
When the screen displays a “no communication” message, it means the VERDICT unit and the
vehicle control module cannot communicate with each other for some reason.
The following conditions cause a “no communication” message to display:
•
The Scanner is unable to establish a communication link with the vehicle.
•
You selected a system for testing that the vehicle is not equipped with (such as ABS).
•
There is a loose connection.
•
There is a blown vehicle fuse.
•
There is a wiring fault on the vehicle, or in the data cable or adapter.
•
There is a circuit fault in the data cable, Personality Key, or adapter.
•
Incorrect vehicle identification was entered.
Refer to the Vehicle Communication Software manuals for manufacturer-specific problems.
5.4 Navigation
This section describes how to navigate the Scanner interface and select scanner tests.
5.4.1 Scanner Screen Layout
The Scanner screens typically include three sections (
):
Содержание VERDICT D7
Страница 1: ...User Manual May 2011 EAZ0063L05C Rev B ...
Страница 3: ...iii ...
