manualshive.com logo in svg

Snap-On Vantage Legend, Руководство пользователя


Поделиться
Скачать
background image

Scope / Multimeter

General Information

15

3.7   General Information

This section describes the general Scope Multimeter control icon functions, screen 
layout and optional settings. The screen layout and control icon functions are 
shared between the 
digital/graphing multimeters and lab scope.

NOTE

Scope and Multimeter tests are not vehicle specific, therefore vehicle 
identification is not required.

3.7.1  Scope Multimeter Screen Layout and Features

1— Toolbar

—contains navigational and control icons

2— Data Buffer Position Indicators

—graphical and numerical position 

indicators

3— Main Body

—contains the meter/scope display

4— Control Panel

—contains channel/trace controls 

5— Expand/Collapse icon

—toggles display between split and full screen views

Figure 3-9 

Scope Multimeter Control Icons

The following control icons are common across most Scope Multimeter functions, 
however use may vary depending on the active function or test. A yellow frame 
surrounding an icon (highlighted), indicates it is selected. Other control icons (not 
shown) are described in 

Common Toolbar Control Icons

 on page 6

.

Icon

Function

Pause

 - Pauses the data buffer

Start (Capture) 

- Resumes active data collection.

Control Panel

 - (

a

). In full screen mode, when selected this icon 

becomes surrounded by a white frame and opens the control panel at the 
bottom of the screen while switching active selection focus to the Show/
Hide or Probe icon in the Control Panel.
(

b

). In split screen mode (control panel open), when selected this icon 

becomes surrounded by a white frame and switches active selection 
focus to the Show/Hide or Probe icon in the Control Panel.

Note:

 Switching active selection focus to the Control Panel allows 

manual navigation (using the directional control buttons) of the Control 
Panel control icons

Zoom

 - Increases and decreases screen magnification. The zoom 

function is only available during data review (scope paused).

Cursors

 - Toggles cursors on/off.

Step Forward

 - moves to the next point in the data. To quickly step 

forward, select this icon (yellow frame appears) then press and hold the 
Y/

a

 button.

(

Note: 

To quickly step forward during data playback, press and hold the 

icon down until a red frame appears around the icon.)

Forward 1 Frame

 - allows forward movement by one frame. To quickly 

skip forward, select this icon (yellow frame appears around icon) then 
press and hold the Y/

a

 button

Содержание Vantage Legend























































































Отзывы:

Нет отзывов

Похожие инструкции для Vantage Legend

Laica SB2200 Instructions And Guarantee preview
SB2200
Бренд: Laica Страницы: 4
NAD M52 Owner'S Manual preview
M52
Бренд: NAD Страницы: 10
Backyard Discovery Aurora Owner'S Manual & Assembly Instructions preview
Aurora
Бренд: Backyard Discovery Страницы: 51
Nautilus HDP6D-LFHR Assembly Manual preview
HDP6D-LFHR
Бренд: Nautilus Страницы: 12
CAIRE SPRINT User Manual preview
SPRINT
Бренд: CAIRE Страницы: 16
NEILPRYDE RS6 Manual preview
RS6
Бренд: NEILPRYDE Страницы: 55
HANYOUNGNUX STE Series Instruction Manual preview
STE Series
Бренд: HANYOUNGNUX Страницы: 4
Park House Healthcare WARWICK User Manual preview
WARWICK
Бренд: Park House Healthcare Страницы: 6
J&M TF2 Operator'S Manual preview
TF2
Бренд: J&M Страницы: 33
Parker HTG Series Service Procedure preview
HTG Series
Бренд: Parker Страницы: 64
Parker F11 series Service Spare Parts List preview
F11 series
Бренд: Parker Страницы: 40
Parker Matrx Digital MDM Cabinet Mount Installation Instructions preview
Matrx Digital MDM
Бренд: Parker Страницы: 20
Parkside 304002 Quick Start Manual preview
304002
Бренд: Parkside Страницы: 2
Park House Healthcare Tudor User Manual preview
Tudor
Бренд: Park House Healthcare Страницы: 12
R-Biopharm RIDA qLine ZG2601 Operation Instructions Manual preview
RIDA qLine ZG2601
Бренд: R-Biopharm Страницы: 23
Mako MK5 Operator'S Manual preview
MK5
Бренд: Mako Страницы: 17
Balluff BOS R254K-UUI-LH10-S4 Installation Manual preview
BOS R254K-UUI-LH10-S4
Бренд: Balluff Страницы: 12
M-Audio Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology... User Manual preview
Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...
Бренд: M-Audio Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды