20
Settings
Settings Menu
Object Distance
The
Object Distance
setting allows you to optimize the accuracy of the Thermal Laser, by setting
the approximate distance to the object you are measuring.
Options:
•
Near
- 1 to 3 feet (30.48 to 91.44 cm)
•
Far
- 3 to 10 feet (91.44 to 304.8 cm)
NOTE:
i
The Thermal Laser uses two cameras to provide the blended (overlay) effect of the thermal image
over the visual light image. As the two cameras view slightly different images due to their
alignment with an object, when viewing objects that are close to the camera the image may
appear mis-aligned. This visual effect of the position of an object that appears to differ when
viewed from different positions is known as parallax.
When objects are viewed closer than 1 foot (30.48 cm) they will always display slightly
mis-aligned, however as the imager is moved farther away from the object the misalignment
decreases. Therefore, to optimize the accuracy of the Thermal Laser when used in close proximity
of an object 1 to 3 feet (30.48 to 91.44 cm), the Object Distance setting should be set to
Near
.
About (Factory Reset)
Selecting
About
displays hardware and software version information, and provides the option to
reset the device to factory settings.
Select
Ok
to exit the screen.
Select
Factory Reset
to reset the following to their factory default settings (as shown):
•
-Color Palette - Iron
•
-Brightness - Level 50%
•
-Language - English
•
-Temperature Unit - Fahrenheit
•
-Automatic Shutdown - Disabled
•
-Emissivity - 0.95
•
-Navigation Tips - Disabled
•
-Spotlight Intensity - High
•
-Object Distance - Near
•
-Opacity Overlay Level - 60%
When Factory Reset is selected a confirmation screen is displayed, select the
Y
button to proceed
with the reset or the
N
button to cancel.
If
Y
is selected a confirmation screen displays to indicate the reset was completed, and then the
option to delete all images is provided, select the
Y
button to delete all images or the
N
button to
cancel.
Содержание Thermal Laser
Страница 1: ...User Manual BC ...
