manualshive.com logo in svg

Snap-On PRO-LINK EDGE, Руководство пользователя по оборудованию

Поделиться
Скачать
Snap-On PRO-LINK EDGE Скачать руководство пользователя страница 89

 - The Diagnostics Menu

PRO-LINK

®

 Edge Hardware and Software User’s Manual  85

Tests

The PRO-LINK

®

 Edge provides a wide range of special tests. However, the avail-

ability of tests is dependent on both the vehicle to which the device is connected 
and the module loaded (e.g., engine, transmission, etc.). The first time you select 
the Tests tab during the current session, you are prompted to select a module. If 
the selected module does not have any special tests associated with it, a informa-
tional message is displayed.

NOTE:

i

Not all software applications support tests. For example, Heavy Duty Stan-
dard (HDS) J1939, among others, does not support tests. If tests are not 
available for a specific module, the module will not display in the list of 
modules.

In addition, the screen associated with each test is unique to that test. Most special 
tests include Info Text (e.g., detailed instructions on running that particular test, 
quick steps for multiple routines, and test tips). 

NOTE:

i

Look for Info Text icon in the upper-right corner of the test screen. If you 
see the icon, Info text is available. Just touch the icon to display the 
information.

Finally, Some tests require the vehicle to be in a particular state (e.g., Engine 
Coolant Temperature greater than 140 °F). If this is the case for the test you 
select, the PRO-LINK

®

 Edge will provide specific prerequisites that must be met 

before starting the test. Once you have met the prerequisites for the test, the 
screen for that test is displayed.

Содержание PRO-LINK EDGE
























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды