42 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter
3
• Getting Started
The Parameters Tab
The PRO-LINK
®
Edge creates a Parameters tab for each module loaded (e.g.,
Engine
and
Engine Retarder
). Depending on the number of modules loaded, you
may, or may not, have multiple parameters tabs displayed.
The first time the Parameters tab is selected during your session the you are
prompted to select a parameter category. The categories displayed depend
upon the module and application.
Touch the list and drag your finger up to scroll through the list of categories.
Touch the screen to select a category (e.g.,
Pressures
), and display the
parameters for that category.
Figure 3.13
Category Selection Screen