Snap-On PRO-LINK EDGE Скачать руководство пользователя страница 109

Страница: 109 / 215

- Features Available from the Drop-Down Menu

PRO-LINK

Edge Hardware and Software User’s Manual 105

Two options are available:

• English (lbs., mph, °F)

• Metric (kg, kph, ° C)

Select the unit of measure you want PRO-LINK

Edge to use.

The menu closes, and the underlying Diagnostics Menu is displayed.

Play Recording

The Play Recording menu item is not available if you have not previously created
a recording.

NOTE:

For more information on creating and playing a recording, see

Chapter 9:

Using Record and Playback

, later in this manual.

To play a recording:

Touch drop-down menu available either from Main Menu or the Diagnostics
Menu.

Figure 4.53

Diagnostics Menu

Touch

Play Recording

Содержание PRO-LINK EDGE
























































































































































































































Результаты поиска

Содержание PRO-LINK EDGE

Отзывы:

Snap-On PRO-LINK EDGE, Руководство пользователя по оборудованию, Страница: 109 / 215

Результаты поиска

Содержание PRO-LINK EDGE

Отзывы: