43
ALTUS (ALTUSDRIVE.com) - Image Sharing/Storage
Registration - Getting Started
8.4.2 ALTUS - SureTrack User Setup
z
If you already have a SureTrack account, follow these steps to register and setup your
ALTUS account:
From a PC or mobile device:
1. Connect the thermal imager to a Wi-Fi network, see
2. Write down the Serial Number, PIN and Code that are displayed when the device connects to
the Wi-Fi network, or leave the screen displayed. Codes can also be found in the Settings
menu, see
3. Using a mobile device or PC, visit
https://ALTUSDRIVE.com
and select
Login
(upper right
screen).
4. Log in using your SureTrack
Username
and
Password
.
5. Open the
Profile Manager
(additional login may be required).
6. From the
Device Management
tab, select
Add Device
.
7. Enter your
Serial Number
,
PIN
,
Code
, and
Device Name
.
8. Log out of Profile Manager, then select the
ALTUS Home Page
browser tab to get started.
9. Turn the thermal imager off, and then on.
10. See
Your Diagnostic Thermal Imager is now registered to your ALTUS online account. Images will be
automatically sent (only when connected to Wi-Fi) to your online account from the device.
NOTE:
i
If the device is not connected to a Wi-Fi network when the images are taken, they will not be sent
to the ALTUS account. Wi-Fi connection is required to upload the images to ALTUS.