30
Settings
Settings Menu
Object Distance
Selecting
Object Distance
allows you to optimize the accuracy of the thermal imager, by setting
the approximate distance to the object you are measuring.
Use the
Up / Down
control buttons to make a selection (
Near / Far
) from the menu, then press the
Y
button to enable the selection and return to the settings menu.
Options:
•
Near
- 1 to 3 feet (30.48 to 91.44 cm)
•
Far
- 3 to 10 feet (91.44 to 304.8 cm)
NOTE:
i
The thermal imager uses two cameras to provide the blended (overlay) effect of the thermal image
over the visual light image. As the two cameras view slightly different images due to their
alignment with an object, when viewing objects that are close to the camera the image may
appear mis-aligned. This visual effect of the position of an object that appears to differ when
viewed from different positions is known as parallax.
When objects are viewed closer than 1 foot (30.48 cm) they will always display slightly
mis-aligned, however as the imager is moved farther away from the object the misalignment
decreases. Therefore, to optimize the accuracy of the thermal imager when used in close
proximity of an object 1 to 3 feet (30.48 to 91.44 cm), the Object Distance setting should be set to
Near
.
Wi-Fi Status
The Wi-Fi Status screen provides connection status indicators that can be used to troubleshoot
connection issues. See
Micro SD card check
The micro SD card check function is used to check the file system integrity of the micro SD card.
If errors are found during the check, this may indicate possible micro SD card damage which could
cause an inoperative condition. For micro SD card support, contact Customer Support see
