manualshive.com logo in svg

Snap-On D10, Руководство пользователя

Получите бесплатное руководство по эксплуатации для продукта Xtrons D10 прямо сейчас! Инструкция по эксплуатации поможет вам максимально использовать все функции этого устройства. Просто загрузите руководство с нашего сайта manualshive.com и начните эксплуатировать ваш Xtrons D10 без проблем.

Поделиться
Скачать
background image

126

© 2012 Snap-on Incorporated. All rights reserved.

8-13963A03 Rev. D

Software License Agreement, 
North America

SNAP-ON INCORPORATED LICENSE AGREEMENT

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE INSTALLING THIS SOFTWARE
PACKAGE. WHOEVER INSTALLS THIS SOFTWARE PACKAGE MUST EITHER BE THE PERSON WHO ACQUIRED THE
SOFTWARE OR A PERSON AUTHORIZED BY THE PERSON OR ENTITY WHO ACQUIRED THE SOFTWARE TO ACCEPT
THE FOLLOWING TERMS ON SUCH PERSON'S OR ENTITY'S BEHALF. “YOU” AND “YOUR” SHALL REFER TO THE
PERSON OR ENTITY WHO ACQUIRED THIS PRODUCT. INSTALLING THIS SOFTWARE PACKAGE INDICATES YOUR
ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY
RETURN THE SOFTWARE PACKAGE, UNINSTALLED, TO THE PLACE OF PURCHASE.

LICENSE Upon your acceptance of this License Agreement (the “Agreement”), Snap-on Incorporated (“Snap-on”) grants, subject
to the terms and conditions of this Agreement, to the person or business entity who originally acquired the Software Products
(“Software”) a non-exclusive, non-transferable (except as permitted below), personal license to use the Software (“License”). The
Software in this package is a proprietary product of Snap-on and is protected by copyright law, as well as other intellectual
property laws. Snap-on retains title and ownership of the Software, and it is being licensed to you and not sold. All rights, not
expressly granted to you, are reserved by Snap-on.

CONSENT Each time you use this Software, you consent to the collection, use, disclosure, and processing of Personal
Information in accordance with the Privacy Policy attached as Exhibit A. In particular, if you are located in a jurisdiction outside
the United States, you consent to the transfer of this information to our servers and computer systems in the United States, a
country that may not provide an “adequate” level of data protection within the meaning of the laws in your country. You may
withdraw your consent at any time, subject to any applicable legal or contractual restrictions and prior written notice to Snap-on.
If you wish to withdraw your consent, please contact Snap-on using our information below.

You may contact us at:

Snap-on Incorporated
2801 80th Street
P.O. Box 1410
Kenosha, WI 53141-1410

PERMITTED USES YOU MAY: (i) install the Software on a single automotive diagnostic computer, the diagnostics tool for which
it was intended, provided you keep the original solely for backup or archival purposes; (ii) transfer the Software and License to
another party if the other party agrees to accept the terms and conditions of this Agreement, you retain no copies of the Software,
and you transfer all of the Software to such other party.

PROHIBITED USES YOU MAY NOT: (i) copy the Software into any machine readable or printed form for backup or archival
purposes; (ii) modify, merge, translate, decompile, reverse engineer, disassemble, decode, or otherwise alter or attempt to derive
the source code of the Software; (iii) use the Software on more than one computer at the same time; (iv) separate the Software's
component parts for use on more than one computer; the diagnostics tool for which it was intended (v) transfer, assign, rent,
lease, sell, or otherwise dispose of the Software on temporary or permanent basis except as expressly provided herein; (vi) use
the Software in any outsourcing, timesharing or service bureau arrangement; and/or (vii) provide, disclose, divulge or make
available to, or permit use of the Software by any third party without Snap-on's prior written consent. You will not remove any
proprietary notices from the Software and will include such notices on any authorized copies of the Software.

TERM The License is effective until terminated. You may terminate it at any time by destroying the Software. The License will also
terminate automatically without notice from Snap-on if you fail to comply with any provision of this Agreement. You agree upon
such termination to destroy the Software and upon Snap-on's request to certify in writing that you have so destroyed the Software.

LIMITED WARRANTY Snap-on warrants, for a period of sixty (60) days from the date of delivery to you as evidenced by a copy
of your sales receipt, that the Software will perform substantially in accordance with the accompanying technical specifications in
the documentation, under normal use. THIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ANY OTHER EXPRESS

Содержание D10















































































































































Отзывы:

Нет отзывов

Похожие инструкции для D10

ABB AutoLink Mounting Instructions preview
AutoLink
Бренд: ABB Страницы: 11
Keithley S530 Diagnostic Manual preview
S530
Бренд: Keithley Страницы: 67
Keithley S530 Option Manual preview
S530
Бренд: Keithley Страницы: 23
Keithley S530 User Manual preview
S530
Бренд: Keithley Страницы: 93
Oki APR-5000 User Manual preview
APR-5000
Бренд: Oki Страницы: 44
Magnescale MJ100 Manual preview
MJ100
Бренд: Magnescale Страницы: 64
Cambro Camshelving Quick Start Manual preview
Camshelving
Бренд: Cambro Страницы: 6
Fayat BOMAG BW 100 ADM-5 Operating Instruction preview
BOMAG BW 100 ADM-5
Бренд: Fayat Страницы: 216
B medical systems MT100 Instructions For Use Manual preview
MT100
Бренд: B medical systems Страницы: 28
IDEAL Networks NaviTEK NT Quick Reference Manual preview
NaviTEK NT
Бренд: IDEAL Networks Страницы: 10
Saeyang Marathon Multi600 Manual preview
Marathon Multi600
Бренд: Saeyang Страницы: 21
S&C TripSaver II Quick Start Manual preview
TripSaver II
Бренд: S&C Страницы: 11
XFit TARGET User Manual preview
TARGET
Бренд: XFit Страницы: 16
Nakamichi BlackBox Series Service Manual preview
BlackBox Series
Бренд: Nakamichi Страницы: 23
Harken 3387 Instructions preview
3387
Бренд: Harken Страницы: 4
A&D MS-70 User Handbook Manual preview
MS-70
Бренд: A&D Страницы: 33
Econo-Wrap EW-450S Operator'S Manual & Parts Breakdown preview
EW-450S
Бренд: Econo-Wrap Страницы: 27
Hatco HWBI-S Series Installation And Operating Manual preview
HWBI-S Series
Бренд: Hatco Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды