ZBJP1B rev B 06/11/2014
3
Ball Joint Press Component Assembly
Insert steel ball (ME9A34) into opening of pressure screw (BJP1-2) as shown in FIG.
Secure steel ball inside screw by inserting small snap ring (ME7A209A) into internal
snap ring groove of screw as follows:
1.
Place snap ring partially into groove while compressing ring so that the ends
overlap as shown in FIG. 1.
2.
Press ring into screw opening until ring snaps securely into groove.
WARNING
Insert large snap ring (ME7A208A) into internal snap ring groove of each of the (11)
adapters in the parts list on page one (adapters BJP1-5A through BJP1-16A) as
follows:
1.
Place snap ring partially into groove while compressing ring so that the ends
overlap as shown in FIG. 2.
2.
Press ring into adapter opening until the ring snaps securely into groove.
WARNING
FIGURE - 1
FIGURE - 2
ME7A209A
ME9A34
BJP1-2
ME7A208A
BJP1-14A
