ZBJP1B rev B 06/11/2014
2
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety and operating instructions for
the Snap-on® Ball Joint Press Master set. Refer to the information in
this manual as required for safe operation.
READ ALL INSTRUCTIONS
Read all the instructions in this manual. Read, understand and follow
all safety messages and instructions in this manual, and on all ball
joint press part components. Safety messages in this section contain
a signal word, a three-part message, and in some cases, an icon.
Safety symbols, when present, give a graphical description of the
potential hazard or how to avoid potential hazard.
WARNING
Wear safety goggles, user and bystander.
Be sure all adapter-to-adapter connections are secure.
Avoid misalignment of ball joint press assembly when
tightening pressure screw on ball joint and control arm.
If misalignment occurs,
STOP
tightening screw.
Unthread screw until assembly is loose. Properly realign
press assembly on ball joint and control arm.
WARNING
Refer to manufacture’s service manual for properly supporting and
raising of vehicles in a safe and secure manner.