Page 24
Appendix C: Initial Charge Instructions
Before using the MOST50 E-O Converter, a full charge cycle must be completed as follows:
1. Turn
OFF
the power switch.
2. Connect the 12 V power supply to the power jack. The
Charge
LED (blue) will turn on, indicating a fast-
charge cycle is in progress.
3. Wait until the
Charge
LED turns off. The initial charge may take three to four hours to complete.
Once the initial charge is complete the E-O Converter is ready to use.
To ensure maximum battery life, do not disconnect the 12 V power supply until the fast-
charge cycle is complete.
