SMSC MediaLB, Руководство по оборудованию

Страница: 9 / 28

MediaLB Analyzer
Hardware Manual
Document Version: V2.0.X-2 Date: 2008-12-17
2 Introduction
The MediaLB Analyzer is a tool defined by a combination of hardware and software components
designed to allow observation and visualization of MediaLB data in a comfortable way.
The MediaLB Analyzer consists of the following main modules:
Hardware Modules
•
MediaLB Monitor USB - converter box transferring MediaLB data received from the Active-Pods
via USB2.0 to a Host PC (described in chapter 3). It represents a package of the MediaLB Monitor
(3)
converter box, cables required to setup a MediaLB Analyzer, power supply and hardware
manual.
•
Active-Pods
(2)
- functioning as interface to the MediaLB port of the Device Under Test
(1)
(described in chapter 4)
Software Module
•
OptoLyzer Suite
(6)
– software supporting analyzing and visualizing of MediaLB data (see
separate OptoLyzer Suite documentation for details). OptoLyzer Suite is running on a Host
PC/laptop
(4)
. The USB connector on the PC has to be a USB 2.0 High Speed connector
(5)
.
Figure 2-1: MediaLB Analyzer Overview
This manual describes the hardware modules MediaLB Monitor converter box and the Active-Pods.
All components of the MediaLB Analyzer including the MediaLB Monitor USB, the Active-Pods and the
OptoLyzer Suite software need to be purchased to complete a MediaLB Analyzer setup. Especially the
Active-Pods should be purchased in dependence of the requirement to analyze a 3-pin or 6-pin
MediaLB interface and in relation to the required MediaLB Debug Header (Low Speed or High Speed).
Copyright © 2008 SMSC Hardware Manual
Page 9