Smoothskin bare+, Руководство пользователя

Страница: 8 / 29

14
15
The Treatment Regime: First let’s talk about what NOT to
expect. As for ALL home-use IPL or laser treatments (don’t
believe anyone who would tell you otherwise), one treatment
won’t last forever. You will need to keep treating the hairs every
once in a while to avoid hair growth starting up again; but the
great thing about SMOOTHSKIN BARE+ is that it will prevent hair
regrowth as long as you keep treating regularly, so if you keep it
up, you will never have to experience stubbly legs or underarms
again. Hoorah!
To get the most out of your SMOOTHSKIN BARE+, you should
use it weekly on each treatment area, to ensure all hair follicles
are treated.
4.0 HOW TO USE
4.1 GETTING STARTED
1. Before using SMOOTHSKIN BARE+, prepare the area to be treated by making sure it is shaved (making sure to remove all visible hair prior to every
treatment), cleaned and dried. Any hairs remaining above the surface of the skin may damage the front of your device and could cause an adverse reaction.
Remember, don’t use any gels or creams with this device!
2. Power on the device. Plug the power supply in using the cable provided. The skin tone sensor on the front of the handset will illuminate
blue and the fan will start up.
FLASH SHAVE PREVENTS REGROWTH
ZZZ ZZZ ZZZ
There is no added benefit of using the device more frequently (per body area) due to the normal hair growth cycle. Using the device more frequently could
cause skin irritation.
In the first few weeks following the initial treatments, you will still see some hairs growing. These will likely be the hairs that were not treated in their growth
phase (when IPL is most effective) so be sure to keep up with the treatments!
Within 4 weeks, you should be seeing a reduction in hair regrowth. There will still be some hairs that need treating as you need to catch each hair in the right
phase, but don’t worry, things will only get better from here on in - so keep going!
Side Effects: You shouldn’t expect to see any significant side effects from the treatments. If you do notice anything out of the ordinary, just flick to section 5.2
for a bit more information.
Keeping Continuously Smooth: After 12 weeks, all the hairs should have been treated, and you’ll just be required to top up ever 2-3 weeks. However, it must
be noted that everyone’s length of treatment is different (because we all have different skin, hair, lifestyle… even genetics play a role!) so from now on it’s
mostly up to you to define what is the right regime for you.
The secret to staying silky smooth is to keep at it and stick to your treatment regime. With regular use, you will see fewer and fewer hairs growing back. These
hairs should also be finer, lighter in colour and grow more slowly. As time goes on, you will be able to completely replace your shaving routine.
Visit the SMOOTHSKIN website (www.smoothskin.com) for further advice and for helpful tips on how to use and get the best out of your SMOOTHSKIN BARE+.
Whoa there! One step at a time...
Before your first treatment on each new body area, test your skin (in that area) for a reaction to SMOOTHSKIN BARE+.
The Patch Test area should be approximately 3cm x 2cm (equivalent to 2 flashes side by side).
1. Follow the instructions in the ‘Getting Started’ section to begin as usual.
2. Treat the area.
3. Wait 24 hours.
4. If there’s no reaction after 24 hours, you’re good to go! The ‘patch tested area’ should NOT be re-treated for at least 1 week.
4.2 FEATURES
Skin Tone Sensor: SMOOTHSKIN BARE+ has a unique, sophisticated skin tone sensor. During a treatment, the sensor is continuously active, searching for a
valid skin tone. If the skin tone sensor does not detect a valid skin tone, or is not in full contact with the skin, then the handset cannot be activated. Make sure
the handset is placed flat against your skin, as it will only detect the correct Skin Tone when pressed against the skin.