www.smoothfitness.com
17
ASSEMBLY
STEP 5
:
Attach the Console Base, Upright Covers and Handlebars
(A) Place the console base #131 on top of the upright tube #68 and align the
bolt holes (See Fig. 5A)
(B) Secure the console base to the upright tube by using 3 x #18 Allen bolts.
Completely tighten the bolts now
(C) Attach the upper upright covers #132A and 132B around the upright post
and secure the covers together by using 7 x #135 screws and 4 x #30
screws. (See Fig.5B2) Do not completely tighten these screws until step 6
(D) Feed the heart rate wire and toggle switch wires for the hand grips through
the small hole below the handlebar bracket and then up through the top of
the upright tube. Lay the wires over the top of console base covers
(E) Attach and secure the handle bars to the handle bar bracket on the upright
tube by using 2 x #6 Allen head bolts. Completely tighten the bolts (See
Fig 5C)
Tighten the handlebar bolts now.
(F) Place the handlebar cover over the handlebar bolts and secure it to the
upper upright post covers by using 2 x #136 screws.
#18
3
#135
7
#30
4
#6
2
#134
1
#136
2
Fig 5A
1
2
3
4
5
6
Fig 5B2
Control board
Fig 5C
Fig 5B1
