Smiths Medical SurgiVet V3404 Plus, Руководство по эксплуатации

Страница: 58 / 86

Chapter 10: Serial Output
10-2 Operation Manual SurgiVet
®
V3404 Plus
WARNING! IEC 950 approved equipment must be placed outside of the “patient environment.” The
patient environment is defined as an area 1.5m (4.92 feet) from the patient.
Figure 9.2: Patient Environment
Serial Output Setup for RS-232 Connections
The serial output data format and output interval or amount can be changed only if no serial output is in
progress. To change the data format selection:
Select
SERIAL OUT
from the Main Menu. If
START PRINT = NO
, then no serial output is currently in
progress, so proceed with step 2. Otherwise,
START PRINT = YES
and you must select
NO
to halt the
current output before the serial output data settings can be changed.
To change the data format (Patient Data or Trend Tables):
Use the ARROW keys (
no
) to point to the
DATA FORMAT
item, then press
b
.
Use the ARROW keys (
no
) to switch between formats. When the format changes, the menu item below it
changes.
Press
b
to accept the selection.
If
PATIENT DATA
is selected, the menu item displayed below it is:
INTERVAL
. (See Figure 10.1)
To change the output
INTERVAL
:
Use the ARROW keys (
no
) to point to
INTERVAL
, then press
b
.
Use the ARROW keys (
no
) to change the value.
Press
b
to accept the selection.
If
TREND TABLES
is selected, the menu item below it is:
PRINTER TYPE
.
1.
2.
3.
4.
1.
2.
3.