1. Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter
hose, hose nut, or barb prior to assembly.
1
. Align hose barb tabs, push hose barb into tank
until it stops
(See Figure A)
.
2. Slide hose nut into place and turn clockwise to
tighten.
(See Figure B)
.
NOTE: Do not use tools to tighten hose nut.
Figure A
Figure B
3. Assemble Shut-off to Wand
Screw on Wand Assembly to end of Shut-off
and tighten securely.
(See Figure D)
2. Assemble Wand & Nozzle
Place nozzle onto the end of the
wand assembly and tighten securely.
(See Figure C)
Configuration for
nozzle tip sprayers
Figure C
Figure D
SETTING UP YOUR BLEACH SPRAYER
190447
QUICK START GUIDE
