Power supply ICOS-PS 3160 series
Installation, use and maintenance manual - EN
Ver. 1.05
29
5.6 Braking/discharge resistor output - J2
This connector allows the wiring of a power resistor for the dynamic braking and automatic discharge (ICOS-
PS 3162 only); the following illustration shows the pinout of the connector (because it's a resistor, it is not nec-
essary to observe the polarity):
Connector type: Phoenix Contact GFKC 2,5/3-ST-7,62 (1939646)
Order code: KF101043
Features
Conductors cross section * **
Connection in accordance with
EN-VDE
Solid min.
0,2 mm²
Rated voltage
400 V
Solid max.
2,5 mm²
Rated current
12 A
Stranded min.
0,2 mm²
Stranded max.
2,5 mm²
Insulating material
PA
Stranded, with ferrule without plastic
sleeve min.
0,25 mm²
Inflammability class according to
UL 94
V0
Stranded, with ferrule without plastic
sleeve max.
2,5 mm²
Stripping length
10 mm
Stranded, with ferrule with plastic sleeve
min.
0,25 mm²
Screwdriver to be used for open-
ing the connections
0,6 x 3,5 mm
Stranded, with ferrule with plastic sleeve
max.
2,5 mm²
AWG according to UL / CUL min
26
AWG according to UL / CUL max
12
*= Use 60 °C / 75 °C wires only
**= Use Copper Conductors only
R
R
Braking resistor
Marker
Signal
R
Resistor - 1
R
Resistor - 2
