IR lamp control module - HELCON 11XX series -
Installation, use and maintenance manual - EN
Ver. 1.02
7
3.3 Precautions against the risk of electrocution
3.4 Precautions against contact with hot parts
3.5 Residual risks
The main power connector is subjected to high voltages during module operation; pay at-
tention (danger of electrocution).
During all phases of installation and maintenance of the equipment, disconnect it safely from
the power supply network. Electrolocution risk.
Some components of the apparatus (for example: the aluminum heatsink) are made of con-
ductive materials. They must be connected securely to the protective conductor (PE) using
the appropriate terminals, to avoid risk of electrolocution.
Never use the device partially or totally disassembled. Danger of electric shock and / or
damage to persons and property.
The parts of the apparatus can reach an extremely high temperature in operating mode or
post-operation; take particular care not to touch the parts of the equipment in these cases,
or use special protections and precautions during handling: HOT SURFACE, RISK OF
BURNS.
By using the device in the construction of a machine, the manufacturer must take all pre-
cautions to avoid the operator's contact with the hot parts, to avoid the risk of burns.
The apparatus generates an electromagnetic field during operation. Danger for people with
pacemakers, metal prostheses or hearing aids.
