COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
3 Safety instructions
3.1 General information
Do not install or use the equipment before integrally reading and understanding this manual. In case
of difficulties of interpretation, contact SMITEC technical service.
It is absolutely forbidden to use the equipment for different purposes than the ones described in this
manual. The technical data and the drawings in this manual might have been modified later; always
refer to the latest version. All upgrades can be requested to SMITEC S.p.A. directly.
Make sure that the personnel is qualified and adequately informed about the risks he may run and
how to avoid them.
The COSMOS 315X / 325X / 350X series servo drives is authorized can be used only after the
classification of the machine operating area and after checking the safety levels, which must
correspond to the assembly safety levels.
3.2 Precautions during handling and assembly
Use adequate tools during the assembly, in order to avoid crushing or abrasions.
Metal components and sharp surfaces may cause cuts and tears. In case of contact, be very careful
and wear the personal protection equipment.
Ver. 1.07
Pag. 9
