COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
5.3.9 General I/O
The I/O of this connector (if there is one in the model) are designed for general purposes under the control of the
master device of the field bus and/or they can be set on the driver through the operator interface.
CAUTION
It is necessary to strictly adhere to the connection polarity of the mains voltage of the I/O section, in
order to avoid irretrievable damages to the driver.
It is necessary to strictly adhere to the voltage limits indicated in the specifications, in order to avoid
malfunction and/or irretrievable damages to the driver.
ATTENTION
Il est nécessaire de respecter scrupuleusement la polarité de connexion de la tension d'alimentation
de la section d' I/O afin de ne pas risquer des pannes irrémédiables du variateur.
Il est nécessaire de respecter les limites de tension indiquées dans les spécifications afin de ne pas
provoquer de dysfonctionnements et / ou de pannes irrémédiables du variateur.
Connettor type: Phoenix Contact FMCD1,5/11-ST-3,5 (1738898
) * **
Order code: KF101048
Features
Conductor cross section
Connection in compliance
with
EN-VDE Solid min.
0,2mm²
Rated voltage
160V
Solid max.
1,5mm²
Rated current
8A
Stranded min.
0,2mm²
Stranded max.
1,5mm²
Insulating material
PA
Stranded ferrule without plastic sleeve min.
0,25mm²
Flammability rating (UL
94)
V0
Stranded ferrule without plastic sleeve max.
1,5mm²
Stripping length
10mm
Stranded ferrule with plastic sleeve min.
0,25mm²
Screwdriver to be used to
open the connections
0,6 x
3,5mm
Stranded ferrule with plastic sleeve max.
0,75mm²
*= Use 60/75 °C wires only (UL)
**= Use Copper Conductors only (UL)
I/O connector
Pin
Signal
Pin
Signal
1
IN1 V-
12 IN1 V+
2
AN GND
13 OUT C+
3
OUT V+
14 IN2 V-
4
IN2 V+
15 AN GND
5
I/O 8
16 I/O 7
6
I/O 6
17 I/O 5
7
I/O 4
18 I/O 3
8
I/O 2
19 I/O 1
9
I/O GND
20 I/O 24V
10 I/O GND
21 I/O 24V
11 I/O GND
22 I/O 24V
Ver. 1.07
Pag. 45
