COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
5.3.6.2
COSMOS Type 3XXX (second series)
Connector Type: D-SUB HD15 M (not supplied)
Order code: --------
Features
Connector cross section
5.3.6.2.1 Encoder connections 24V OC/HTL
Connector E1
Label
Signal
1
NTC
2
NTC
3
+24Vdc
4
GND
5
Shield
6
Phase A
7
Phase B
8
9
10
11
12
13
14
15
SHELL
Shield
5.3.6.2.2 Differential Encoder 5V connections (except Type 3502)
Connector E1
Label
Signal
1
NTC
2
NTC
3
+5Vdc
4
GND
5
Shield
6
Phase A+
7
Phase B+
8
Hall U+ (#1)
9
Hall V+ (#1)
10
Hall W+ (#1)
11
Phase A-
12
Phase B-
13
Hall U- (#1)
14
Hall V- (#1)
15
Hall W- (#1)
SHELL
Shield
(#1) The circuitry in these models is designed for non balanced signals; therefore, it is possible to only connect positive
poles (U+, V+, W+); should negative poles be available (U-, V-, W-), it is possible to connect them to the connector
pins, in order to obtain a better immunity to interferences.
Ver. 1.07
Pag. 40
