21
GENERAL INSPECTION AND MAINTENANCE
7.0
GENERAL INSPECTION AND MAINTENANCE
No maintenance is to be carried out on the chair while in use to reduce the risk of injury.
The user will not require any tools when completing their inspections.
When completing services, the authorised service engineer will provide their own tools, including:
1 x set of metric Allen keys.
7.1 Daily Checks - To Be Completed by User
Prior to each use the Hardrock chair must be inspected visually.
Should any of these items fail the inspection, DO NOT use the chair.
Contact your local authorized dealer for service – contact details are on the last page of
this manual.
Visually check for the following:
•
Check the tray (if supplied) to ensure no parts are loose or damaged.
•
Check all upholstery for signs of wear and tear.
•
Check that the hand wheels tighten correctly, and are not cross-threaded or damaged.
•
Check that the leg screws are present and are tightened correctly.
•
Check all straps for fraying, and that buckles are not missing/damaged.
•
Check the strap is securely fastened to the poppers on the underside of the chair.
7.2
Service Interval
The Hardrock chair should be serviced annually. Servicing must only be undertaken by a
Smirthwaite Ltd. service engineer, or by a Smirthwaite Ltd. trained representative.
7.3
Nominal Service Life
Your product has a nominal service life of 7 years, during which full post-sales support will be
available with regard to spares and servicing.
Product service life has been determined based upon the design complexity of product, and the
anticipated exposure to normal use.
Good practice dictates all Smirthwaite Ltd. products have been designed and manufactured to high
levels of safety and quality, and will meet requirements of normal use when maintained in line with
our servicing recommendations.
Содержание HARDROCK
Страница 1: ...1 P a g e User Manual Hardrock ...