18
5.7
POMMEL
If the pommel is ordered with the chair, then it will arrive attached. It can easily be
removed
and refitted.
To remove the pommel from the chair:
Locate the plunger pin (19) underneath the seat base and behind the footrests (if
attached)
Pull the plunger pin (19) downwards until it is fully extracted.
Keeping the plunger pin (19) extracted, pull the pommel out and away from the
chair.
Release the plunger pin (19).
Store the pommel in a secure place
To refit the pommel to the chair:
Push the arm of the pommel into the slot located just above the plate that attaches
the footrest to the chair. This will be at the front of the chair.
With the pommel in position, pull the plunger pin (19) until it is full extracted.
Keeping the plunger pin (19) extracted, slide the pommel backwards until it hits the
back of the slot.
Release the plunger pin (19).
Move the pommel forward and backwards slightly until the plunger pin (19) clicks
and fully retracts. This will lock the pommel in position.
19
Содержание BROOKFIELD HI-LO
Страница 1: ...04 19 i BROOKFIELD BROOKFIELD HI LO INSTRUCTIONS FOR USE...
Страница 31: ......