Refrigerated service cabinet
v.1.0
12
Refrigeration installation
The refrigeration installation is realised by connecting the refrigerated service cabinet to a
remote cooling unit.
The field connections of the cooling piping set are situated centrally and their standard
location is underneath the first independent appliance unit on the left.
The cooling pipes to a potential sequence of sections are situated under the appliance and
should be connected at the site of the division line.
The Refrigeration installation should only be carried out by a qualified contractor.
Electrical installation
Before connecting the electrical connections you should be sure that the power voltage and
frequency agree with the specifications included (see type plate).
Electrical connections should be executed in accordance with the applicable regulations.
Before any repair work is carried out on the electrical live parts, the power supply to the part
involved must be closed.
Before the device is switch on check if:
•
the electrical connections are correctly connected;
•
the screwed joints for the different connection clamps are fastened tightly.
The electrical installation with thermostat control is situated under the appliance.
The electrical connection is situated centrally and its standard location is underneath the first
independent appliance unit on the left.
The electrical installation is realised by connecting the refrigerated service cabinet to the
power supply of the shop.
The power supply to any potential sequence of sections should be connected with a
coupling cable between the switch boxes. For nominal power consumption see the
information on the identification label in the appliance.
