background image

Use

65

EN

6. Press the keys 

 and 

 at the same 

time to reset the programmer clock.

Programmed cooking

1. Set the cooking time as described in the 

previous point “Timed cooking”.

2. Press 

. The sum of the current time plus 

the pre-set cooking duration will appear 
on the display.

3. Use the 

 or 

 key to set the required 

minutes.

4. Wait approx. 5 seconds without pressing 

any key in order for the function to 
activate. The current time and the 
symbols 

 and 

 will appear on the 

display.

5. At the end of cooking the heating 

elements will be deactivated. On the 
display, symbol 

 turns off, symbol 

 

flashes and the buzzer sounds.

6. To turn off the buzzer just press any key 

of the programmer clock.

7. Press the keys 

 and 

 at the same 

time to reset the programmer clock.

It is not possible to set a cooking 
time of more than 10 hours.

After the setting, to display the 
cooking time left press the 

 key.

To reset the set program, press the 
keys 

 and 

 at the same time 

and switch off the oven manually.

Programmed cooking is the 
function which allows a cooking 
operation to be started at a set 
time and then ended after a 
specific length of time set by the 
user.

After the setting, to display the 
cooking time left press the 

 key. 

To display the end of cooking time, 
press the 

 key.

Содержание Victoria TR4110IRW









































Отзывы: