Cleaning and maintenance
39
EN
4.4 Pyrolytic cycle
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Remove all accessories from the oven
cavity.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Turn the function knob to the
symbol.
The symbol
and
will
automatically appear on the display,
alternating with the minimum pyrolytic
cycle time (2 hours).
2. Press the
or
button within 5
seconds to set the duration of the
cleaning cycle, from a minimum of 120
minutes to a maximum of 3 hours and 30
minutes. The set minutes will be indicated
by the internal segments of the clock,
while the hours will be indicated by the
relative flashing numbers (1, 2 or 3)
.
3. After selecting the duration of the
pyrolytic cycle, the thermostat indicator
light starts to flash and the oven cavity
starts to heat up (approx. 5 seconds after
the last intervention by the user).
4. Press the
button to confirm the start
of the pyrolytic cycle, or do not use the
display for at least 5 seconds
.
Pyrolytic cleaning is an automatic,
high-temperature cleaning
procedure that causes dirt to
dissolve. Thanks to this process, it is
possible to clean the inside of the
oven very easily.
The Pyrolytic function is only for the
main oven.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Medium dirt: 165 minutes.
• Heavy dirt: 210 minutes.
