2
1.3.
Declaration of conformity with product standards
This appliance is marked in compliance with European Directive 2002/96/EC on waste electrical and electronic
equipment (WEEE). Make sure that this product is disposed of correctly in order to safeguard public health and
the environment. Decommission the appliance in compliance with local waste management regulations. For
further information on the processing, disposal and recycling of this product, contact the local authority,
domestic waste collection service or your Smeg reseller. The appliance must be earthed in compliance with
electrical safety regulations
The manufacturer shall bear no liability for any injury or damage cause by failure to comply with the instruction
given in this manual, improper use, tampering with even a single part of the appliance, or the use of non-original
spare parts.
2
SYMBOLS
This symbol indicates that you must read the instructions contained in the manual carefully.
This symbol is placed next to information relevant for the safety of persons and the
appliance itself.
This symbol is placed on some parts enclosing hazardous live components, indicating a risk
of electric shock.
This symbol is placed by the terminal for the connection of the system's equipotential
earthing system.
This symbol is placed next to important information. Carefully read the instructions given
and follow the behavioural rules and operations outlined therein.
This symbol is placed next to technical instructions and information aimed at qualified
personnel who must perform installation, commissioning, testing and any extraordinary
maintenance operations.
The presence of this symbol indicates that the appliance must be consigned to a disposal
centre for recycling at the end of its life, in compliance with regulations in the country of
use. Contact a specialised centre for disposal.
Transport and unpacking requirement
This symbol indicates a hot surface hazard
