background image

Instructions

6

Risk of damaging the appliance

• Do not use abrasive or corrosive 

detergents (e.g. scouring 
powders, stain removers and 
metallic sponges) on glass parts.

• Use wooden or plastic utensils.
• Racks and trays should be 

inserted as far as they will go into 
the side guides. The mechanical 
safety locks that prevent them from 
being removed must face 
downwards and towards the 
back of the oven cavity.

• Do not seat on the appliance.
• Do not use steam jets to clean the 

appliance.

• Do not obstruct ventilation 

openings and heat dispersal slots.

• Never leave the appliance 

unattended during cooking 
operations where fats or oils 
could be released, as these could 
then heat up and catch fire. Be 
very careful.

• Never leave objects on the 

cooking surface.

• DO NOT FOR ANY REASON 

USE THE APPLIANCE AS A 
SPACE HEATER.

• Do not spray any spray products 

near the oven.

• Do not use plastic cookware or 

containers when cooking food.

• Do not put sealed tins or 

containers in the oven.

• Remove all trays and racks which 

are not required during cooking.

• Do not cover the bottom of the 

oven cavity with aluminium or tin 
foil sheets.

• Do not place pans or trays 

directly on the bottom of the oven 
cavity.

• If you wish to use greaseproof 

paper, place it so that it will not 
interfere with the hot air circulation 
inside the oven.

• Do not use the open door to rest 

pans or trays on the internal glass 
pane.

• Cooking vessels or griddle plates 

should be placed inside the 
perimeter of the hob. 

Содержание SCB91MCN9





















































Отзывы: