background image

 

 

 Warranty 

                                                  THIS WARRANTY IS VALID IN AUSTRALIA ONLY

 

 

Note: 

Please complete the following details when you have unpacked the product and 

retain

 this card with the purchase invoice or sales docket. 

 

Warranty: 

This product is covered by a Warranty in addition to all rights available to you by statute. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a 

major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or 

replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.  

 

The Warranty is for a period of two years (24 months) from the date of purchase for Parts and Labour, however, Dishwashers will have a 

10 Year Parts and Labour Warranty on the Electric Wash Motor.  

 

The Warranty period for Front load washers and dryers will carry a full 5 year warranty and a 10 year parts and labour warranty on the 

Electric Wash Motor Only.  

 
Refrigeration appliances will have an additional three years (36 months) Warranty

after the initial 24 months, for Parts only on the 

Sealed System eg; compressor, condenser, evaporator, filter dryer and pipe work, subject to the following conditions;  

 

The conditions mentioned above are; 

  

1.  that the purchaser carefully follows all instructions packed with the product; 

 

2.  that the purchaser carefully follows the installation instructions provided and complies with the electrical wiring regulations, gas and/or 

plumbing codes; 

 

3.  that the purchaser carefully follows the instructions provided in the own

er’s handbook relating to the proper use and care of the product 

and does not use the product for any purpose other than the Domestic, indoor use, for which it has been designed. 

 

4.  that the product was purchased and installed in Australia; 

 

5.  that this Warranty does not extend to; 

 

a)  Optional glass lids for hobs apart from claims which relate to mechanical or physical damage thereof at the date of purchase; 

b)  Light globes (with the exception of microwave oven globes); 

c)  Damage to ceramic glass caused by liquid or solid spillovers, lack of maintenance or impact. Please read the booklet 

explaining about liquids containing 

sugar

d)  Damage to the surface coatings caused by cleaning or maintenance using products not recommended by the owners 

handbook; 

e)  Defects caused by normal wear and tear, accident, negligence, alteration or misuse. 

f)      A product dismantled, repaired or serviced by any serviceperson other than an authorised employee or agent of Smeg      

        Australia Pty Ltd; 

g)  The servicing of Freestanding Microwaves under this Warranty does not cover in home service and is limited to the appliance 

being taken to the nearest Service Agent.  

h) 

The provision of service under this Warranty is limited by the boundary of the nearest agent’s area. Travelling cost incurred

 for 

service outside this area is not covered by this Warranty and will incur commercial cost to be paid by the customer regulated 

by the number of kilometres travelled beyond the service area. 

  

        For service, please contact your local Smeg Australia Pty Ltd office or dealer/retailer from whom you purchased the product. If you are   

        unable to establish the date of purchase, or if the fault is not covered by this Warranty, or if the product is found to be in working order,  

        you will be required to bear all service call charges. 

  

 

CONTACTS:                                                                                                                          DETAILS: 

 

SYDNEY 

 HEAD OFFICE......................Ph. (02) 86674888   Fax (02) 86674800             Model No

………………………………………..

 

 

QUEENSLAND……………

.

..

………….Ph.

 (07) 32660444   Fax (07) 32667511             Serial No: 

………………………………

.

………

 

 

NEWCASTLE

……………………….….....Ph.

 (02) 49609266    Fax (02) 49609277             Date of Purchase: 

…………

..

…………………

 

 

CANBERRA 

(Contact Wagga Wagga)

.

…..

.....Ph. (02) 69228600   Fax (02) 69228611              Retailer: 

…………………………..…………….

 

 

WAGGA WAGGA………………

.

………

...Ph. (02) 69228600   Fax (02) 69228611              Invoice/Docket No: 

………

..

…………………..

 

 

VICTORIA………………………

.

…………Ph

. (03) 90941999   Fax (03) 90941990              

Customer Name: ………………………………

 

 

TASMANIA……………………

.

…………..Ph

. (03) 63348166   Fax (03) 63348177              

Customer Telephone: ………………………….

 

 

SOUTH AUSTRALIA………

.

…………...

..Ph. (08) 83461888   Fax (08) 83401034              

Customer Address: …………………………….

 

 

        

WESTERN AUSTRALIA…………….……Ph. (08) 93898000   Fax

 (08) 93898088               

…………………………………………………..

 

 

                                           

                         Smeg Australia Pty Ltd, 2 

 8 Baker Street, Banksmeadow.  N.S.W.  2019  (www.smeg.com.au) 

 

                                                                  ABN No.33 146 901 082.      ACN No.146 901 082 

 

Содержание SAWS 1014






























Отзывы: