manualshive.com logo in svg

Smeg PM6912WLDRAU, Руководство пользователя, Страница: 35 / 52

Поделиться
Скачать
Smeg PM6912WLDRAU Скачать руководство пользователя страница 35

Installation

37

EN

3. 

Additional requirements for 

Freestanding and Elevated Cooking 
Appliaces – (Measurements D & E)

 

Where D, the distance from the 
periphery of the nearest burner to a 
horizontal combustible surface is less 
than 200 mm, then E shall be 10 mm or 
more, or the horizontal surface shall be 
above the trivet. See insets above.

Notes

1. Requirement 3 does not apply to a 

freestanding or elevated cooking 
appliance which is designed to prevent 
flames or the cooking vessels from 
extending beyond the periphery of the 
appliance.

2. The ‘cooking surface area’ is defined as 

that part of the appliance where cooking 
normally takes place and does not 
include those parts of the appliance 
containing control knobs.

3. For definition of hob, see Clause 1.4.64.

4. For definition of trivet, see Clause 

1.4.109.

5. Consideration is to be given to window 

treatments when located near cooking 
appliances. See Clause 5.3.4.

5.2 Safety instructions

Veneers, adhesives or plastic coatings on 
adjacent furniture should be temperature-
resistant (

>90°C

), otherwise they might 

warp over time.

The minimum clearances must also be 
respected for the edges of the hob on the 
back as indicated in the mounting 
illustrations.

The appliance connection point 
shall be accessible with the 
appliance installed.

Heat production during appliance 
operation

Risk of fire

•  Check that the carcase material is heat 

resistant.

•  Check that the carcase has the required 

openings.

The minimum clearance between a 
ventilation hood and the cooking 
surface must be at least the 
distance indicated in the ventilation 
hood installation instructions.

Содержание PM6912WLDRAU





















































Отзывы:

Нет отзывов