5
Description
Installation
EN
1 Description
1 Grid
2 Burner cap
2 Installation
Proceed as follows to replace the grids and
burner caps:
1. Pull one of the two horizontal spokes of
the grids upwards to remove them.
2. Remove the burner caps.
3. Fit the EVERSHINE treated burner caps
to the corresponding burners.
4. Position the EVERSHINE treated grids,
taking care that the pins
A
line up with
their seats on the hob, then press down
with your palm until they click into place.
The special EVERSHINE treatment
makes the stainless-steel burner
caps and grids highly heat resistant,
preventing yellowing due to high
temperatures.